BENDIXKing KY 97A Installationshandbuch PDF herunterladen (Seite 10)

B KY 96A, KY 97A

Rev 4, Apr 2003 IM 006-00674-0004.dwd Page 1-4

1.4 UNITS AND ACCESSORIES SUPPLIED

NOTE: Not all configurations listed below are currently available, consult Bendix/

King Equipment Catalog for further information.

1.4.A. KY 96A VHF Comm Transceiver, P/N 064-1052-XX, which is configured in the

following versions:

1.4.B. KY 97A VHF Comm Transceiver, P/N 064-01051-00XX, which is configured in

the following versions:

SPURIOUS RESPONSES AND CROSS

MODULATION PRODUCTS:

At least 80 dB down.

INTERCOM INPUT: When the mic is connected to the intercom input both

the receiver and mic audio appears at the audio output.

100 mVrms of mic audio into 500 ohms is required for

100 mW output.

TABLE 1-2 KY 96A Configurations

PART NUMBER

RECEIVER

SELECTIVITY

AUDIO OUTPUT FREQUENCY RANGE

064-1052-10 25 kHz 500 ohm headphone 118.000 to 135.975 MHz

064-1052-11 50 kHz 500 ohm headphone 118.000 to 135.975 MHz

064-1052-30 25 kHz 500 ohm headphone 118.000 to 136.975 MHz

064-1052-31 50 kHz 500 ohm headphone 118.000 to 136.975 MHz

064-1052-50 25 kHz 8 W into 4 ohms 118.000 to 135.975 MHz

064-1052-51 50 kHz 8 W into 4 ohms 118.000 to 135.975 MHz

064-1052-60 25 kHz 8 W into 4 ohms 118.000 to 136.975 MHz

064-1052-61 50 kHz 8 W into 4 ohms 118.000 to 136.975 MHz

064-1052-70* 25 kHz 8 W into 4 ohms 118.000 to 136.975 MHz

*Crown Series Unit

TABLE 1-1 Technical Characteristics

SPECIFICATION CHARACTERISTIC

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Keine Kommentare

BENDIXKing KY 97A Installationshandbuch Seite 10